Shuaibu Ndache MOHAMMED (2007) Design and Construction of a Hydraulic Ram Pump

getCITED

Home Search Add Content Reports Help

Edit Publication | Edit Contributors | Delete Publication | Edit References | Edit Citations

Add to Bookstack | Show Bookstack | Change Bookstack

Design and Construction of a Hydraulic Ram Pump

Post a Comment

CONTRIBUTORS:

Author:

Shuaibu Ndache MOHAMMED

JOURNAL:

Leonardo Electronic Journal of Practices and Technologies, 6(11), 59 - 70.

YEAR:

2007

PUB TYPE:

Journal Article

SUBJECT(S):

Engineering, Environment

DISCIPLINE:

Engineering and Applied Sciences

HTTP:

http://lejpt.academicdirect.org/A11/059_070.htm

LANGUAGE:

English

PUB ID:

103-439-895 (Last edited on 2008/01/06 10:24:47 US/Mountain)

SPONSOR(S):

ABSTRACT:
The Design and Fabrication of a Hydraulic Ram Pump (Hydram) is undertaken. It is meant to lift water from a depth of 2m below the surface with no other external energy source required. Based on the design the volume flow rate in the derived pipe was 4.5238 × 10-5 m3/s (2.7 l/min), Power was 1.273 kW which results in an efficiency of 57.3%. The overall cost of fabrication of this hydram shows that the pump is relatively cheaper than the existing pumps.

STATISTICS

Click on # to view
Citations		0
References		0
Comments		0
Quality		0/0.00
Interest		0/0.00
View(er)s		1/1401

Quality
	N/A
High
	7
	6
	5
	4
	3
	2
	1
Low

Interest
	N/A
High
	7
	6
	5
	4
	3
	2
	1
Low

Prev | Next