The effect of pedal crank arm length on joint angle and power production in upright cycle ergometry
|
 |
|
Post a Comment
|
|
|
|
|
CONTRIBUTORS:
|
|
|
JOURNAL:
|
|
|
YEAR:
|
2000
|
|
PUB TYPE:
|
Journal Article
|
|
SUBJECT(S):
|
ANGLE; POWER; MAN; YOUNG-ADULT; BICYCLE-ERGOMETRY; ANKLE-JOINT; HIP-JOINT; KNEE-JOINT
|
|
DISCIPLINE:
|
No discipline assigned
|
|
HTTP:
|
|
|
LANGUAGE:
|
English
|
|
PUB ID:
|
103-366-776
(Last edited on
2002/02/27 18:44:58 US/Mountain)
|
|
SPONSOR(S):
|
|
|
ABSTRACT:
The aim of this study was to determine the effect of five pedal crank arm lengths (110, 145, 180, 230 and 265 mm) on hip, knee and ankle angles and on the peak, mean and minimum power production of 11 males (26.6 +/- 3.8 years, 179 +/- 8 cm, 79.6 +/- 9.5 kg) during upright cycle ergometry. Computerized 30 s Wingate power tests were performed on a free weight Monark cycle ergometer against a resistance of 8.5 % body weight. Joint angles were determined, with an Ariel Performance Analysis System, from videotape recorded at 100 Hz. Repeated-measures analysis of variance and contrast comparisons revealed that, with increasing crank arm lengths, there was a significant decrement in the minimum hip and knee angles, a significant increment in the ranges of motion of the joints, and a parabolic curve to describe power production. The largest peak and mean powers occurred with a crank arm length of 180 mm. We conclude that 35 mm changes in pedal crank arm length significantly alter both hip and knee joint angles and thus affect cycling performance.
|
|
|
|
STATISTICS
|
|
Click on # to view
|
|
Citations
|
|
0
|
|
References
|
|
0
|
|
Comments
|
|
0
|
|
Quality
|
|
0/0.00
|
|
Interest
|
|
0/0.00
|
|
View(er)s
|
|
2/450
|
|
|
|
|
|
|
| Prev |
Next |
|